This is a very affordable 3D printed optics mount.
Compatible optics size: 12.5mm / 12.7mm (0.5inch)
Compatible optics form: Square / Rectangular
A compatible optics (lens, cylindrical lens, grating, baffle, slit ..etc) can be used in this mount. To mount the optics, first the component is put in the middle recess which covers the outer 1.5mm of the total aperture. Then the component is fixed in the recess using a M6 plastic (nylon) set screw. For this purpose up to four M6 threaded holes can be used.
The mount can be fixed on a M6 threaded optical post or can be mounted in a 30mm or 60mm cage system. Further holes in the corners (8x) can be used for a cage system application.
The mount comes with 2x M6x8 nylon set screws (mounting optics) and 3x M6x8 steel set screws (mounting post and cage system rods).
All DIY-Optics.com optomechanics are compatible with other industry standard optomechanics. (Thorlabs, Edmund Optics, Optosigma ..etc.)
See drawing for further dimensions.