We will design, simulate, optimize, analyse a optical system for you. This will be a sequential or non-sequential optical simulation. We will choose a set of catalogue lenses (as far as possible) according to your and the optical systems requirements.
Telescopes, microscope objectives, beam expanders, spectrometers, interferometers, eyepieces, fiber collimation, hyperspectral imagers, rangefinders .. so any optical system can be designed using optical simulations.
As an output, you will get a list of components and their positions/distances to build your optical system. The simulation model and the 3D design file (.stp) can be provided too, if required.
Difficulty refers to the to the complexity/detail of the required simulation model and results. Roughly it means the following. Level 1 is something what can be done within 1-3 hours and Level 10 would take roughly a 4 weeks of full time effort. That gives an hourly rate of $55 per hour.
An NDA (non-disclosure agreement) can be done, if required.
Please send me your requirements to start with the project. (Daniel: daniel@diy-optics.com)
Check out some FRED optical simulation videos on our YouTube Channel ..